Any Mini Z Club who can setup a same race track layout are welcome to join the Mini Z race challenge.

 

This is a stock class series race.  Results will posted online and points will be awarded to the drivers.

The series will start with all drivers running on the PN80T motor and to add more fun to this series race, top 15 drivers on the chart will have to run the PN80T motor in the next round while the rest can run the PN70T. This serves as a handicap for the top drivers thus giving others a upper hand on the next run. You won't want to see the same guys topping the chart the entire year don't you?

 

Top 15 drivers who miss/skip any race will need to still run the PN80T motor for the next following race. No Excuse for that.

1. All clubs must be able to lay the same layout for the event.

2. Clubs must have a lap counting system i.e. Core Analog , Giro Z or AMB.
3. Each club must have a minimum of 3 drivers per mains. Filler drivers are allowed.
4. All races are to be ran in the clockwise directions.
5. Clubs can choose to run the heats and qualifying in any format however the mains are to be 12 minutes.
6. Results are to be updated by the judge or the organizer of the race.
7. Results will have to be updated by the last day of each month latest.

 

Technical Specifications

 

Race Class

- 2WD Stock

 

Motor

- PN80T / PN80T

- No illegal tampering is allowed. All motor must be in the Original can, Original armature and magnets  

- Racers are allowed to break in the motor and apply comm drops before, after or in between runs.

- Both carbon and silver brushes are allowed.

 

PCB/Electronics

- Kyosho MIni-Z 27Mhz/2.4Ghz ASF / Ad band

- RV Project Fine-Tuned unit board 

- Changing or stacking of FETs is allowed

 

Chassis

- 2WD  (90mm to 98mm wheelbase)

- MR01, MR02, MR015 and MR03 Only

 

Body

- Kyosho Mini Z, R246 and TRP Scale Body Only

- All windshield and window must be installed

- Pan Cars, Le Mans, Lexan GT Bodies are NOT ALLOWED

 

Bearings

- Any type of bearing by any manufacturer is allowed.

 

Batteries

- Cars must be powered by four AAA batteries, Alkaline, Ni-Mh or Ni-Cd battries only. No other types of batteries are allowed. 

Wheel Rims

- All brand plastic and aluminum rims are allowed. 

- Maximum front wheel width is 8.5mm. 

- Maximum rear wheel width is 11mm.

- Maximum wheel diameter is 21mm.

- Rims must fit within the width of the car body.

 

Hop up parts

- Drivers may use any Kyosho or aftermarket parts available.

 

Weight, Width & Height

- Minimum weight (175g)

- Max wheel base (98mm)

- Max car length (180mm)

- Max car width (80mm)

- Max car height with wings (45mm) 

 

For further enquires, please email info.mzrc@gmail.com